電梯門套有很多種材質的選擇但最耐用又高檔的就是用天然石材石材電梯門套不但堅固的硬度在晝夜溫差較大的環境下也十分的耐用不會因?yàn)闇囟茸兓l繁而產生變形天然石材電梯門套的耐用性美觀性

　　There are many materials to choose from for elevator door frames, but the most durable and high-end one is natural stone. The elevator door frames are not only sturdy and hard, but also very durable in environments with large temperature differences between day and night. They will not deform due to frequent temperature changes. The durability and aesthetics of natural stone elevator door frames are excellent

　　電梯門套天然石材不論是質感還是花色，都有非常多的選擇。無論裝修在家里或者是公司里，都是非常好的選擇。

　　There are many choices of natural stone for elevator door frames, whether in terms of texture or color. Whether decorating at home or in the office, it is a great choice.

　　現在一些三層的獨立別墅都裝上了電梯，而天然石材電梯門套的耐用性美觀性也受到了消費者的喜愛

　　Nowadays, some three story independent villas are equipped with elevators, and the durability and aesthetics of natural stone elevator door frames have also been favored by consumers

　　1、電梯門套線是沿電梯門洞的四周（沒有頂?shù)綐菍拥捻敳浚?/p>

　　1. The elevator door frame line runs around the elevator door opening (without reaching the top of the floor)

　　電梯套的測量跟門窗套方法基本上是一樣的，之所以單獨的將電梯套提出來講，因?yàn)殡娞萏椎某叽缡怯稍ㄖ碾娞荻纯诤碗娞蓍T框共同決定的，這是與門窗套的尺寸測量最大的區別。

　　The measurement of elevator covers is basically the same as that of door and window covers. The reason why elevator covers are mentioned separately is because the size of elevator covers is determined by the original building's elevator openings and door frames, which is the biggest difference from the measurement of door and window covers.

　　1、電梯門套線是沿電梯門洞的四周（沒有頂?shù)綐菍拥捻敳浚┻@是最常規最基本的電梯套施工方式，簡單的都讓人不想去敘述。可是正是因?yàn)槟馨炎罨镜膯栴}想明白了，我們面對非常規才能更游刃有余。由于電梯門框的尺寸是固定的，就決定了兩個側板之間的距離也是固定的。

　　1. The elevator door frame line runs along the perimeter of the elevator door opening (without reaching the top of the floor), which is the most common and basic construction method for elevator frames, and even simple ones are difficult to describe. But it is precisely because we can understand the most basic problems that we can face unconventional situations more easily. Due to the fixed size of the elevator door frame, the distance between the two side panels is also fixed.

　　頂板的長度也就是兩個側板之間的距離加上兩塊側板的厚度。側板的高度也是由電梯門框的高度決定的，和門框的高度一樣高。側板和頂板的寬度，要在門洞的上中下取三個點去量電梯門框到墻壁的最外側的距離，取它們當中最大的距離作為電梯側板和頂板的寬度。

　　The length of the top plate is the distance between the two side plates plus the thickness of the two side plates. The height of the side panel is also determined by the height of the elevator door frame, which is the same height as the door frame. The width of the side panel and top panel of the elevator should be measured by taking three points above, below, and in the middle of the door opening to measure the distance from the elevator door frame to the outermost side of the wall. The maximum distance between them should be taken as the width of the elevator side panel and top panel.

　　電梯門套線的寬度必須要能完全的把墻壁和側板之間的距離遮住。

　　The width of the elevator door frame line must be able to completely cover the distance between the wall and the side panel.

　　電梯門套線的長度就是電梯側板的高度加上線條本身的寬度，當然線條的長度可以適當?shù)姆砰L(zhǎng)幾公分，防止工人現場施工切45度角時出現失誤，長一點還可以切成短的，短的就再也不能變成長的了。有的時候門套線的下方還會有個小腳座，寬度和線條相同，高度不定。這時線條的長度就再減去腳座的高度。

　　The length of the elevator door frame line is the height of the elevator side panel plus the width of the line itself. Of course, the length of the line can be appropriately extended by a few centimeters to prevent workers from making mistakes when cutting at a 45 degree angle during on-site construction. If it is longer, it can be cut into shorter ones, and the shorter ones can never become longer. Sometimes there is a small footrest below the door frame line, with the same width as the line and varying height. At this point, subtract the height of the footrest from the length of the line.

　　電梯門套2.電梯門套直接到頂圖1的電梯套沿門洞四周粘貼，那么門洞四周的墻面肯定在同一垂直平面上，而現在這種線條到頂?shù)姆绞骄偷梅謨煞N情況了。

　　Elevator door frame 2. The elevator door frame directly reaches the top. In Figure 1, the elevator frame is pasted around the door opening, so the walls around the door opening must be on the same vertical plane. Now, this line to the top method has two situations.

　　第一種：圖中陰影部分是原建筑墻面（也可以理解成，施工方為了節約材料沒在陰影處貼瓷磚，和石材面板重復了。所以陰影處相當于四周的墻壁是凹進去的）。

　　The first type: The shaded area in the picture is the original building wall (which can also be understood as the construction party not tiling the shaded area to save materials, and repeating it with the stone panel. Therefore, the shaded area is equivalent to the surrounding walls being recessed).

　　這種情況對我們確定面板的尺寸是有利的，面板的作用就相當于用瓷磚把陰影部分填平，使門套四周再處于同一垂直面。門套線條是可以壓著面板的。所以面板的長度不大于兩側瓷磚之間的距離，并且不小于電梯套兩側板之間的距離。

　　This situation is advantageous for us to determine the size of the panel. The function of the panel is equivalent to filling the shaded area with tiles, so that the door frame is in the same vertical plane around it. The door frame lines can be pressed against the panel. So the length of the panel should not be greater than the distance between the tiles on both sides, and not less than the distance between the panels on both sides of the elevator cover.

　　面板的寬度就是用總高減去電梯門框的高度，這是面板最寬的寬度，因?yàn)轫敳康碾娞萏拙€條是壓著它的，所以面板的寬度還可以減少，但是不能減少的超過線條的寬度。側板和頂板的長和寬和1中的測量方法是一樣的。在此不在贅述。

　　The width of the panel is calculated by subtracting the height of the elevator door frame from the total height. This is the widest width of the panel, as the top elevator cover line is pressed against it. Therefore, the width of the panel can be reduced, but it cannot be reduced beyond the width of the line. The length and width of the side panel and top panel are measured using the same method as in 1. I won't elaborate here.

　　第二種：就是圖中的陰影部分和四周處于同一垂直面（簡單理解就是貼了瓷磚了），這時電梯門套線條就不能再壓著面板了，如果要壓著了，就相當于把線條從墻上抬高了一段距離（這個距離可以想成是面板的厚度18加上膠口厚度6）.線條和墻壁之間就需要用收口條收口。

　　The second type is when the shaded area in the picture is in the same vertical plane as the surrounding area (simply understood as being tiled). At this point, the elevator door frame line can no longer press against the panel. If it needs to be pressed, it is equivalent to raising the line a certain distance from the wall (this distance can be thought of as the thickness of the panel 18 plus the thickness of the adhesive opening 6) The gap between the line and the wall needs to be sealed with a sealing strip.

　　想想兩三公分的長條會出現多高的損耗，而且增加了施工難度，同時側板和頂板的寬度也要隨之增加。見下圖。所以這種情況下面板的尺寸要很精確才行。它的長度就是兩塊側板之間的距離，也就是電梯門框的寬度，它的高度就是用地面距頂?shù)目偢叨葴p去電梯門框的高度再減去門套線條的寬度。

　　Think about how much wear and tear would occur with a two to three centimeter long strip, and how it would increase the difficulty of construction. At the same time, the width of the side panels and top panels would also need to increase accordingly. See the figure below. So in this case, the size of the panel needs to be very precise. Its length is the distance between two side panels, which is the width of the elevator door frame. Its height is calculated by subtracting the height of the elevator door frame from the total height from the ground to the top, and then subtracting the width of the door frame line.

　　或者用電梯門框距頂?shù)母叨葴p去門套線條的寬度。而且在施工時要向施工負責人明確粘貼時首先要固定好面板的位置，這樣就等于是給兩個側板的間距固定了，才不會因?yàn)閭?cè)板安裝時它們之間距誤差影響到面板，否則別人又會說是面板的尺寸下小了，其實是因?yàn)槭┕さ捻樞蚋沐e(cuò)了。

　　Or subtract the width of the door frame line from the height of the elevator door frame from the top. And during construction, it is necessary to clarify to the construction manager that the position of the panel must be fixed first when pasting, which is equivalent to fixing the distance between the two side panels, so as not to affect the panel due to the distance error between them during installation. Otherwise, others may say that the size of the panel is too small, but in fact, it is because the construction sequence is wrong.

　　或者怕麻煩的情況下，就和施工負責人商量，把面板的尺寸按照1中的情況測量，把尺寸放大一點，施工的時候，等到門套線貼上去之后，現場量好兩根門套線條之間的距離和頂板距頂部門套線條的距離，再手工切割。

　　If you are afraid of trouble, you can discuss with the construction manager to measure the size of the panel according to the situation in 1, enlarge the size a little, and during construction, after the door frame line is pasted, measure the distance between the two door frame lines and the distance between the top plate and the top department line on site, and then manually cut.

　　手工切割也有技巧，在石材見光面貼上美紋紙，畫好線，然后切割，這樣可以減少崩邊的發生。

　　There are also techniques for manual cutting, such as pasting decorative paper on the visible surface of the stone, drawing lines, and then cutting, which can reduce the occurrence of edge breakage.

　　3.電梯門套常規材料

　　3. Conventional materials for elevator door frames

　　天然石材不論是質感還是花色，都有非常多的選擇。無論裝修在家里或者是酒店里，都是非常好的選擇。

　　Natural stone has a wide range of choices in terms of texture and color. Whether decorating at home or in a hotel, it is a great choice.

　　本文由 泰安工地電梯門套    友情奉獻.更多有關的知識請點擊  http://www.syhuaxi.cn/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from the elevator door frame of Tai'an construction site For more related knowledge, please click http://www.syhuaxi.cn/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.